Model 6194 Deep Hole Vac-u-Gun with Bag
Applications
- Holes in fixtures
- Drilled plastics
- T-slots – groove cleaning
- Coolant evacuation from parts
- Woodworking
- Container cleaning
- Tapped holes
- Cupped surfaces
- Cavity evacuation
- Bottle cleaning
- Punch press tables
Advantages
- Low cost
- No moving parts – maintenance free
- Durable – die cast construction
- Eliminates shock hazard - no electricity
- Meets OSHA pressure and chip guard requirements
- Safe operation - no flying chips
- Lightweight and portable
- Quiet
- Low air consumption
Deep Hole Vac-u-Gun Styles
Model 6194 Deep Hole Vac-u-Gun with Bag includes the Deep Hole Vac-u-Gun andreusable bag.
Model 6394 Deep Hole Vac-u-Gun All Purpose System includesthe Deep Hole Vac-u-Gun, reusable bag, and 10' (3m) of vacuum hose at 1-1/2" (38mm) I.D..
Model 6094 Deep Hole Vac-u-Gun Only consists of only the Deep Hole Vac-u-Gun without any fittings or accessories.
What's Included
- Deep Hole Vac-u-Gun
- Reusable bag
Deep Hole Vac-u-Gun Performance | ||||||
| Pressure Supply | Air Consumption | Vacuum | Sound Level | |||
| PSIG | BAR | SCFM | SLPM | "H2O | kPa | dBA |
| 80 | 5.5 | 15 | 425 | -32 | -8 | 84* |
| *tested in "vacuum" mode with bag attached | ||||||
How the Deep Hole Vac-u-Gun Works | |
 | |
Compressed air, normally 80-100 PSlG (5.5 - 6.9 BAR), flows through the inlet (1) into an annular plenum chamber (2) when the trigger is depressed. A small amount of air is injected into the blow tube (3) to provide lift for the chips or debris. The larger airflow is injected into the throat of the gun through directed nozzles (4). These jets of air create a vacuum at the intake (5) which draws material in and accelerates it through the unit. The chips, debris or other particulates can then be exhausted into a filter bag or hose attached to the Deep Hole Vac-u-Gun System. | |
Deep Hole Vac-u-Gun Standards and Certifications
EXAIR Deep Hole Vac-u-Guns comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC).All sound level measurements are taken at 3 feet away.
Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.
Selecting the Right EXAIR Industrial Vacuum
EXAIR’s patent pending EasySwitch Wet-Dry Vac simplifies the filter change process when switching from vacuuming a dry material to a liquid or vice versa. Utilizing minimal compressed air, the Easy Switch is a powerful pneumatic vacuum that is ideal for any application - wet, dry, light and heavy. It rests upon any 55 gallon drum.
Chip Vac picks up dry or wet chips and delivers them directly to an ordinary drum. It is used to clean chips from fixtures, machines, parts, and work surfaces. The lid can be moved easily from drum to drum to materials separate from recycling. Available in 5, 30, 55 and 110 gallon capacities.
The Reversible Drum Vac is a two-way liquid vacuum that can fill or empty a 55 gallon drum in 90 seconds! It is ideal for spill recovery and filling or emptying coolant sumps. It has no moving parts to wear out. Available in 5, 30, 55 and 110 gallon capacities.
High Lift Reversible Drum Vac is a two-way liquid vacuum that can fill or empty a 55 gallon drum in just 85 seconds from 15 feet! Its powerful pump provides the high lift needed to fill or empty below grade coolant sumps, pits, and cisterns. Available in 30, 55 and 110 gallon capacities.
The Heavy Duty Dry Vac turns an ordinary drum into a powerful, industrial duty vacuum cleaner. It vacuums more dry materials in less time than ordinary vacs. It is ideal for vacuuming abrasives like steel shot, garnet, metal chips, and sand. Available in 30, 55 and 110 gallon capacities.
Heavy Duty HEPA Vac is a rugged HEPA quality vacuum with high capacity cleaning for dusty environments. It is powerfully designed to move more material with less wear. In addition, the Heavy Duty HEPA Vac has been engineered to filter contaminants to HEPA requirements. Available in 30, 55 and 110 gallon capacities.
The Chip Trapper offers a fast, easy way to clean solids such as chips, swarf and shavings out of used coolants and other liquids. It is ideal for use on machines with sumps, parts washers, tanks and storage containers. Available in 30, 55 and 110 gallon capacities.
High Lift Chip Trapper has additional power to clean liquids from solids at greater distances or deeper depths like below grade sumps and cisterns. It efficiently separates solids like chips, swarf and metal shavings out of used coolants and other liquids. It is also capable of moving high viscosity liquids of up to 1400 centipoise! Available in 30, 55 and 110 gallon capacities.
Vac-u-Gun is a vacuum gun, blowoff gun, and transfer tool all-in-one. It is commonly used to vacuum sawdust and shavings and to transfer small parts and pellets. It is also used to blow away water, chips and coolant. Available in three systems.
Deep Hole Vac-u-Gun is a vacuum gun that was engineered to blow chips loose and vacuum them away in one easy step. It is ideal for cleaning cavities, grooves, containers and drilled holes. It has no moving parts to wear out.
-
Model 6194 Deep Hole Vac-u-Gun with Bag. -
Model 6394 Deep Hole Vac-u-Gun All Purpose System removes the chips from a drilled plastic part. -
The Model 6194 Deep Hole Vac-u-Gun cleans the t-slots on a milling machine. -
Model 6194 Deep Hole Vac-u-Gun with Bag includes Deep Hole Vac-u-Gun and reusable bag.
