Large Super Air Nozzle™
Applications
- Part cleaning
- Chip removal
- Liquid blowoff
- Part cooling
- Material conveying
- Part ejection
- Fiber conveying
- Air assist
Advantages
- Reduced compressed air cost
- 10 dBA average noise reduction
- Conserve compressed air
- Improved blowoff performance
- Compact
- Improved safety
- Meets OSHA noise level requirements
- Meets OSHA pressure requirements
- Improved production
Large Super Air Nozzle Materials
Zinc Aluminum alloy - general purpose applications. Max temp 250°F (121°C).
Type 316 Stainless Steel - high temperatures, corrosive environments, and mechanical wear. Max temp 1000°F (538°C).
PEEK Plastic - replaces metals in harsh environments. Offers chemical resistance and is non-marring. Max temp 320°F (160°C).
Accessories
Stay Set Hose - For applications where frequent repositioning of standard force Air Nozzles or Jet is required, the Flexible Stay Set Hoses™ are ideal. Simply mount the hose in close proximity to the application and bend it to aim the airstream at the target. Since the hose has “memory”, it will not creep or bend. It always keeps the aim until physically moved to the next position.
Swivel Fittings - make it easy to adjust the aim of the Air Nozzles and Jets. Correct placement of the blowing angle can help optimize performance, reduce noise levels and improve efficiency. Swivel Fittings permit a movement of 25 degrees from the center axis for a total movement of 50 degrees. Type 303 or 316 Stainless Steel.
Magnetic Bases - are suited to applications where frequent movement of the Air Nozzle or Jet is required. The powerful magnet permits horizontal or vertical mounting that will hold the blowing position of the Stay Set Hose. A shutoff valve is provided that can be used to vary the force and flow.
Large Super Air Nozzle Performance |
|||||
| Air Consumption | Force | Sound Level | |||
| Model | SCFM | SLPM | Lbs | Kg | dBA |
| 1104 / 1105 | 35 | 991 | 1.9 | 0.86 | 82 |
| 1106 / 1107 | 60 | 1,699 | 3.3 | 1.5 | 87 |
| 1112 / 1113 | 91 | 2,577 | 4.5 | 2.04 | 96 |
| 1114 / 1115 | 135 | 3,823 | 6.6 | 2.99 | 99 |
| 1116 / 1117 | 188 | 5,324 | 9.4 | 4.26 | 102 |
| 1118 / 1119 | 300 | 8,495 | 15 | 6.80 | 106 |
| 1120 / 1121 | 460 | 13,026 | 23 | 10.43 | 109 |
|
Force measured at 12" (305mm) from target Sound level measured at 3' (914mm) All measurements taken at 80 PSIG (5.5 BAR) |
|||||
How EXAIR Air Nozzles Work |
|
 |
|
|
Air Nozzles use the Coanda effect to amplify compressed airflow up to 25 times or more. Compressed air is ejected through a series of nozzles on the outer perimeter. As the air travels along the outer wall of the nozzle, surrounding air (blue arrows) is entrained into the stream. The airstream that results is a high volume, high velocity blast of air at minimal consumption. The air is always ejected so it can vent safely, well below OSHA dead end pressure requirements, should the nozzle end be blocked. |
|
Large Super Air Nozzle Dimensions & Airflow |
 Model 1104 and 1105 Large Super Air Nozzle
 Model 1106 and 1107 Large Super Air Nozzle
 Model 1112 and 1113 Large Super Air Nozzle
 Model 1114 and 1115 Large Super Air Nozzle
 Model 1116 and 1117 Large Super Air Nozzle
 Model 1118 and 1119 Large Super Air Nozzle
 Model 1120 and 1121 Large Super Air Nozzle
|
-
These PEEK thermoplastic Large Super Air Nozzles resist the chemicals used in solar panel manufacturing. -
3/8 NPT Large Super Air Nozzles are available with a male or female thread. -
Large Super Air Nozzle family -
Large Super Air Nozzles provide high force values for heavy duty applications like removing products from conveyor belts. -
This stainless steel Large Super Air Nozzle removes debris from a stainless steel screw conveyor. -
The 3/8 NPT Large Super Air Nozzle is available in PEEK thermoplastic which is chemical resistant and performs well in high temperatures. -
Model 1106-PEEK is excellent for blowoff. It's PEEK construction is great for harsh environments.