EXAIR's Nano Super Air Nozzle™ delivers a highly focused, forceful blast of airflow. The air pattern for this small nozzle measures 1.5" in diameter at 6" away from the surface. The noise level is a low 75 dBA. Overall length measures only 0.78". Thread size is M6x0.75 and it is available in 316 stainless steel or PEEK thermoplastic.

Applications

Part cleaning
Chip removal
Liquid blowoff
Part cooling
Material conveying
Part ejection
Fiber conveying
Air assist

Advantages

Reduced compressed air cost
10 dBA average noise reduction
Conserve compressed air
Improved blowoff performance
Compact
Improved safety
Meets OSHA noise level requirements
Meets OSHA pressure requirements
Improved production

Materials

Type 316 Stainless Steel - high temperatures, corrosive environments, and mechanical wear. Max temp 1000°F (538°C).

PEEK Plastic - replaces metals in harsh environments. Offers chemical resistance and is non-marring. Max temp 320°F (160°C).

Accessories

Stay Set Hose - For applications where frequent repositioning of standard force Air Nozzles or Jet is required, the Flexible Stay Set Hoses™ are ideal. Simply mount the hose in close proximity to the application and bend it to aim the airstream at the target. Since the hose has “memory”, it will not creep or bend. It always keeps the aim until physically moved to the next position.

Swivel Fitting for Atto Super Air Nozzle

Swivel Fittings - make it easy to adjust the aim of the Air Nozzles and Jets. Correct placement of the blowing angle can help optimize performance, reduce noise levels and improve efficiency. Swivel Fittings permit a movement of 25 degrees from the center axis for a total movement of 50 degrees. Type 303 or 316 Stainless Steel.

Magnetic Bases - are suited to applications where frequent movement of the Air Nozzle or Jet is required. The powerful magnet permits horizontal or vertical mounting that will hold the blowing position of the Stay Set Hose. A shutoff valve is provided that can be used to vary the force and flow.

Specifications

Performance

How It Works

Dimension & Airflow Pattern

Performance

Nano Super Air Nozzle Performance
Air Consumption		Force		Sound Level
SCFM	SLPM	Ozs	Grams	dBA
8.3	235	8.1	230	75

How It Works

How EXAIR Air Nozzles Work

Air Nozzles use the Coanda effect to amplify compressed airflow up to 25 times or more. Compressed air is ejected through a series of nozzles on the outer perimeter. As the air travels along the outer wall of the nozzle, surrounding air (blue arrows) is entrained into the stream. The airstream that results is a high volume, high velocity blast of air at minimal consumption. The air is always ejected so it can vent safely, well below OSHA dead end pressure requirements, should the nozzle end be blocked.