Standard Air Wipe™

The Standard Air Wipe™ is a good choice when the added durability of stainless steel screws, shims and hose are
Only %1 left

View More
The Standard Air Wipe™ is a good choice when the added durability of stainless steel screws, shims and hose are not required. EXAIR's Standard Air Wipe provides a uniform 360° airstream that is ideal for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose and more. The split design offers easy clamping around the surface of the material moving through it, eliminating the need for threading. Kits include the Standard Air Wipe, shim set, filter separator and pressure regulator (with coupler).

Applications

  • Drying after washing, cleaning, plating or coating
  • Blowoff dust and contaminants
  • Cool hot extruded shapes
  • Uniformly wipe surfaces
  • Dry extruded profiles, rod and medical tubing
  • Eliminate solution carryover - no cross contamination
  • Blow excess water from automotive door gaskets
  • Remove excess coatings, water and oil
  • Dry tube, hose, wire, fiber optics
  • Minimize solution loss due to drag-out
  • Clean paint gun tips
  • Dry screen printed or ink jetted surfaces
  • Clean strips and ribbon

Advantages

  • Quiet
  • Low air consumption
  • Uniform 360° airflow
  • Uniform airflow across the entire diameter
  • Aluminum models for temperatures up to 150°F (66°C)
  • No electricity, no moving parts
  • Non-contact - no wiper blade
  • Split design - compact, rugged, easy to install
  • Lightweight, low profile
  • Tapped holes for mounting
  • Variable force and flow
  • Meets OSHA maximum dead end pressure and noise requirements

Materials

Aluminum - The Standard Air Wipe uses coated screws, plastic shims and a general purpose PVC coupling air hose on sizes up to 4" (102mm). The Standard Air Wipe is best suited to applications in non-corrosive environments where temperatures do not exceed 150°F (66°C).

Accessories

Standard Air Wipe Shim Sets

Standard Air Wipe Shim Sets - The Standard Air Wipe has a .002" (0.05mm) gap setting. The compressed air exhausts through a gap which is set with a plastic shim positioned between the cap and body of the Standard Air Wipe. Force and flow through the Standard Air Wipe may be easily increased by adding shims to open the gap. Kits include a shim set (six additional shims). Shim sets include (2) each of a .001" (0.03mm), .003" (0.08mm) and .004" (0.10mm) thick plastic shim.

Standard Air Wipes are available in two different model types:

  • Standard Air Wipe Only
  • Standard Air Wipe Kits - includes a Standard Air Wipe, shim set, filter separator and pressure regulator (with coupler).
  • Standard Air Wipe Shim Sets - include (2) each of a .001" (0.03mm), .003" (0.08mm) and .004" (0.10mm) thick plastic shim.

I.D.

Standard Air Wipe Only

Standard Air Wipe Kit

Standard Air Wipe Shim Set

1/2" (13mm) 2430 2480 2350
1" (25mm) 2431 2481 2351
2" (51mm) 2432 2482 2352
3" (76mm) 2433 2483 2353
4" (102mm) 2434 2484 2354
5" (127mm) 2435 2485 2355
6" (152mm) 2436 2486 2356
7" (178mm) 2437 2487 2357
9" (229mm) 2439 2489 2359
11" (279mm) 2441 2481 2361

Standard Air Wipe Performance

80 PSIG (5.5 BAR) Air Consumption Sound Level @ 3' (914mm)
Model SCFM SLPM dBA
2429 11.1 314 82
2430 13.9 394 80
2431 19.1 541 80
2432 29.5 835 81
2433 39.8 1,127 82
2434 50.2 1,422 82
2435 60.6 1,716 82
2436 71 2,010 84
2437 81.3 2,302 85
2439 102.1 2,891 87
2441 122.8 3,477 89

Standard Air Wipe Specifications

Standard Air Wipes are available with ten different throat diameters (I.D.):

1/2", 1", 2", 3", 4", 5", 6", 7", 9" and 11" (13, 25, 51, 76, 102, 127, 152, 178, 229 and 279mm). Special diameters are available. Please contact our factory.

Compressed Air Inlets: The Standard Air Wipe has compressed air inlets on each half. General purpose compressed air hose is supplied with sizes up to 4" (102mm) that couples the air supply of one half to the other. Sizes 9" (229mm) and larger have two inlets on each half that must be supplied with compressed air to maintain uniform airflow.

Filtration: The use of clean air is essential. Kits include an automatic drain filter with a 5 micron filter element that is sized properly for flow.

Materials of Construction: The Standard Air Wipe is constructed of aluminum. All models use coated screws and plastic shims. General purpose PVC air hose is included with sizes up to 4" (102mm).

Temperature: The Standard Air Wipe is rated for temperatures up to 150°F (66°C).

Mounting: The Standard Air Wipe can be supported by the compressed air supply pipe. Tapped holes (1/4-20) on the downstream side of the Standard Air Wipe can also be used for mounting.

Regulation: A pressure regulator on the compressed air supply provides infinite control of flow, force and air consumption. Kits include a pressure regulator that is sized properly for flow.

Shim Sets: The Standard Air Wipe has a .002" (0.05mm) gap setting. The compressed air exhausts through a gap which is set with a plastic shim positioned between the cap and body of the Standard Air Wipe. Force and flow through the Standard Air Wipe may be easily increased by adding shims to open the gap. Kits include a shim set (three additional shims). Shim sets include two each of a .001" (0.03mm), .003" (0.08mm) and .004" (0.10mm) thick plastic shim.

Standard Air Wipe Dimensions

EXAIR Standard Air Wipe Dimensions

Model

A

B

C

D

2429 in 3.13 1.13 0.38 2.38
mm 79 29 10 60
2430 in 3.25 1.13 0.50 2.50
mm 83 29 13 64
2431 in 3.75 1.13 1 2.95
mm 95 29 25 75
2432 in 4.75 1.13 2 3.95
mm 121 29 51 100

2433

in 5.75 1.13 3 4.95
mm 146 29 76 126
2434 in 6.75 1.13 4 5.95
mm 172 29 102 151
2435 in 7.75 1.13 5 6.95
mm 197 29 127 176
2436 in 8.75 1.13 6 7.95
mm 222 29 152 202
2437 in 9.75 1.13 7 8.95
mm 248 29 178 227
2439 in 11.75 1.13 9 10.95
mm 299 29 229 278
2441 in 13.75 1.13 11 12.95
mm 349 29 279 329

How the Standard Air Wipe Works

How the Standard Air Wipe Works

Compressed air flows through an inlet (1) of the Air Wipe into an annular chamber (2). It is then throttled through a small ring nozzle (3) at high velocity. This primary airstream adheres to the Coanda profile (4), which directs it down the angled surface of the Air Wipe. A low pressure area is created at the center (5) inducing a high volume flow of surrounding air into the primary airstream. As the airflow leaves the Air Wipe, it creates a conical 360° ring of air that attaches itself to the surface of the material running through it (6), uniformly wiping the entire surface with the high velocity airflow.

Standard Air Wipe Standards and Certifications

CE Compliant OSHA Safe!

EXAIR Standard Air Wipes comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

Conflict Mineral Free

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

Caution WARNING! Cancer and Reproductive Harm - www.P65Warnings.ca.gov/product

Efficiency Lab

Does your company currently use a blowoff product similar to EXAIR’s that you’d like us to evaluate? Ship it to the EXAIR Efficiency Lab! Our qualified staff will test it for FREE, using EXAIR’s calibrated testing equipment. We’ll compare the performance of your existing product (air consumption, effectiveness, noise levels, efficiencies, etc) with the EXAIR Intelligent Compressed Air® products. The results will be published in a comprehensive report that includes a cost savings analysis. For most applications, EXAIR products can help you improve your efficiency AND typically pay for themselves in a matter of weeks.

To participate in our Efficiency Lab testing, please complete this Product Efficiency Survey to give us the details about your current application and blowoff set up. You can also feel free to contact an Application Engineer for more information at (800) 903-9247 or (513) 671-3322.

After completing the form, your product can be shipped to: Efficiency Lab, EXAIR, 11510 Goldcoast Dr., Cincinnati, OH 45249-1621

This offer is available to all customers in the U.S. and Canada only. Some restrictions might apply.

Products must be shipped to EXAIR freight prepaid. EXAIR will pay the return shipping via UPS ground.

If you cannot send in your product, fill out this Product Efficiency Survey to give us the details about your current application and we will estimate the savings for you.

If you have questions about a product or you need help in determining the best model for your application, fill out our Application Assistance Worksheet! When you submit this information, one of our knowledgeable Application Engineers will respond with a recommendation for the EXAIR product best suited for the application.

If you would rather fax the form, you can download the Application Assistance Worksheet PDF, print the completed .pdf file, and fax it to us at (513) 671-3363.

For immediate help, call our Application Engineering Department at 1 800-903-9247.

Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
Back To Top