The vacuum hose (1) is attached to the barbed connection of the Chip Trapper (2). The directional flow control valve on top of the drum (3) and knob on the pump (4) are set to the fill position. A reusable filter bag (5) is included to filter out unwanted
High Lift Chip Trapper offers a fast way to remove unwanted solids from liquid.
For a limited time, a free Model 6492 Vac-u-Gun is included with the purchase of select Industrial Housekeeping Systems. EXAIR's patented* High Lift Chip Trapper offers a fast, easy way to clean chips, swarf and shavings out of used coolants and other liquids that are in wells, pits, or cisterns. Using the High Lift Chip Trapper, you can pump farther, pump higher and pump thicker liquids. The Chip Trapper vacuums the coolant or liquid that is filled with debris and traps all the solids in a reusable filter bag. Only the liquid pumps back out. It is ideal for use on machines with sumps, parts washers, tanks and storage containers of contaminated liquids. *Patent #8153001 and #8268179
Warning: Do not use with any material that has a low flash point or with flammable liquids such as fuel oil, alcohol, mineral spirits, gasoline, or kerosene.
The vacuum hose (1) is attached to the barbed connection of the High Lift Chip Trapper (2). The directional flow control valve on top of the drum (3) and knob on the pump (4) are set to the “fill” position. The air supply valve is opened to permit compressed air at 80-100 PSIG (5.5 – 6.9 BAR) to flow through the pump which pulls the liquid through the hose, then into the reusable filter bag (5). When all liquid is in the drum, the air supply is automatically turned off. The filtered liquid can then be pumped out by setting the directional flow control valve on top of the drum and the knob on the pump to the “empty” position. Once the air supply valve is opened, the air pushes the liquid back through the hose while all solids remain in the reusable filter bag.
Warning: Do not use with any material that has a low flash point or with flammable liquids such as fuel oil, alcohol, mineral spirits, gasoline or kerosene.
Model 6190-110 110 Gallon High Lift Chip Trapper Vacuum System
Promotional High Lift Chip Trapper™ Vacuum System
The vacuum hose (1) is attached to the barbed connection of the Chip Trapper (2). The directional flow control valve on top of the drum (3) and knob on the pump (4) are set to the fill position. A reusable filter bag (5) is included to filter out unwanted
The High Lift Chip Trapper is available in 30, 55 or 110 Gallon sizes.
High Lift Chip Trapper Accessories include a 30, 55 or 110 gallon drum, reusable 5 micron filter bags, chemical resistant hose, compressed air hose, aluminum chip wand and drum dolly.
High Lift Chip Trapper offers a fast way to remove unwanted solids from liquid.
