Super Air Amplifier Shim Set
Super Air Amplifier Systems |
|||||
Super Air Amplifiers are available in four different model types:
|
|||||
| Model | Outlet Diameter | ||||
| 3/4" (19mm) | 1-1/4" (32mm) | 2" (51mm) | 4" (102mm) | 8" (203mm) | |
| Super Air Amplifier Only | 120020 | 120021 | 120022 | 120024 | 120028 |
| Super Air Amplifier Kit | 120220 | 120221 | 120222 | 120224 | 120228 |
| Deluxe Super Air Amplifier Kit | 120220DX | 120221DX | 120222DX | 120224DX | 120228DX |
| High Temperature Air Amplifier Only | N/A | 121021 | N/A | N/A | N/A |
| High Temperature Air Amplifier Kit | N/A | 121221 | N/A | N/A | N/A |
| Deluxe High Temperature Air Amplifier Kit | N/A | 121221DX | N/A | N/A | N/A |
| Super Air Amplifier Shim Set | 120320 | 120321 | 120322 | 120324 | 120328 |
High Temperature Air Amplifier Standards and Certifications
EXAIR Air Amplifiers comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC).All sound level measurements are taken at 3 feet away.
Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.
Awards - Super Air Amplifier
EXAIR's Super Air Amplifiers were a finalist in the 1999 Plant Engineering Product of the Year Awards. The Super Air Amplifier family placed in the Compressed Air category.
Special Air Amplifiers
EXAIR will manufacture special Air Amplifiers suited to your specific application requirements. The Model 121021 High Temperature Air Amplifier was developed for moving hot air to surfaces requiring uniform heating while in a furnace or oven. Modeled after our Super Air Amplifier, the High Temperature Air Amplifier is the most efficient for pushing high volumes of hot air to points that typically remain cool. This special design is rated for environments up to 700°F (374°C) and its surface is protected from heat stress by a mil-spec. coating process (developed for the aircraft industry), allowing easy disassembly for changing shims or cleaning.
Another stainless steel version for flange mounting was developed as a fan back-up for exhausting flue gases from a furnace. In the event of a power failure, this special Air Amplifier can quickly evacuate the fumes that could be harmful to workers close by.
A PTFE plug was used with a stainless steel Adjustable Air Amplifier to help pull a sticky material through a process and prevent the material from depositing on the Air Amplifier. EXAIR's Intelligent Compressed Air® products can be manufactured to your special requirements.
If you have special requirements, please contact an Application Engineer to discuss it.
How to Determine Super Air Amplifier Total Output Flow and Air Consumption |
|||||
 |
|||||
|
Total Airflow: From the performance curves (above), determine total output flow for any Super Air Amplifier at any pressure. Example: A Model 120021 at 60 PSIG (4.1 BAR) supply air pressure has a total output flow of 120 SCFM (3,398 SLPM). Air Consumption: Divide total output flow by the amplification ratio to determine air consumption for any Super Air Amplifier at any air pressure. In the example above, the Model 120021 at 60 PSIG (4.1 BAR) supply air pressure has a total output flow of 120 SCFM (3,398 SLPM). Dividing this total output flow by its amplification ratio of 18 gives an air consumption of 6.7 SCFM (189 SLPM). |
|||||
|
Total Output Flow with 0.003" (0.08mm) thick shim installed. Excludes downstream entrainment. Model 120028 tested with a 0.009" (0.23mm) shim. |
Air Amplifier Model Selection Guide | ||||||
| Efficiency | Sound Level | Mounting Flange | Flow Adjustment | Temperature Rating | Corrosive Applications | |
| Super Air Amplifier | High | Low | Yes | With Shims | 275F° (135C°) | No |
| Aluminum Adjustable Air Amplifier | Medium | Variable | No | Infinite (no Shims) | 275F° (135C°) | No |
| Stainless Steel Adjustable Air Amplifier | Medium | Variable | No | Infinite (no Shims) | 400F° (204C°) | Yes |
| High Temperature Air Amplifier | High | Low | No | With Shims | 700F° (374C°) | Yes |
-
Model 120021 1-1/4" (32mm) Super Air Amplifiers dry off expansion tanks prior to painting. -
Model 120022 2" (51mm) Super Air Amplifiers cool truck pistons. -
Model 6042 2" Adjustable Air Amplifiers with swivel fittings cool inductively heated axles prior to installing the hubs. -
A series of Model 6042 2" (51mm) Adjustable Air Amplifiers blow coolant off 16 cylinder diesel engines. -
Super Air Amplifier Shim Sets -
CE Compliant Air Amplifiers assure safe