EXAIR's Model 6392 Vac-u-Gun All Purpose System has all the parts you need to use your Vac-u-Gun as a portable, lightweight, easy-to-use, small job vacuum tool, transfer tool, or blow gun. A low cost solution to a wide variety of industrial housekeeping problems. The Vac-u-Gun has durable die cast construction with no moving parts to wear out.
Model 6192 Collection System is designed to make your Vac-u-Gun a lightweight, easy-to-use vacuum tool. It includes the Vac-u-Gun, reusable bag, brush, crevice tool, skimmer tool and two extension wands.
Model 6292 Transfer System is designed to turn your Vac-u-Gun into a handy, lightweight transfer tool. It includes the Vac-u-Gun, 10' (3m) of vacuum hose at 1-1/2" (38mm) I.D., brush, crevice tool, skimmer tool and two extension wands.
Model 6392 All Purpose System makes it easy to use your Vac-u-Gun as a lightweight vacuum or handy transfer tool. It includes the Vac-u-Gun, a reusable bag, 10' (3m) of vacuum hose at 1-1/2" (38mm) I.D., brush, crevice tool, skimmer tool and two extension wands.
Compressed air, normally 80-100 PSlG (5.5 - 6.9 BAR), flows through the inlet into an annular plenum chamber. Airflow is injected into the throat of the gun through directed nozzles. These jets of air create a vacuum at the intake which draws material in and accelerates it through the unit. The chips, debris or other particulates can then be exhausted into a filter bag or hose attached to the Vac-u-Gun System.
